Sprinkler systems are self-acting fire extinguishing systems having an uncomplicated as well a safe
functioning principle. A network of piping and sprinkler heads is installed throughout the areas of the
building requiring protection and is constantly under pressure. Under normal conditions the sprinkler
head is closed off by a liquid filled bulb. If due to the effects of a fire, the ambient temperature in the
immediate vicinity rises by approximately 30 °C above the maximum temperature expected under normal
conditions, the glass bulb bursts. The pressurized extinguishing water then flows through the piping into
the sprinkler head and the resulting water jet hits the spray plate which diverts the spray to the areas to be
covered. At the same time the water flow in the piping network trips the alarm systems. When the fire is
extinguished you replace the sprinkler that was activated and the system is ready for operation again.
In order to provide effective solutions for the diverse variety of fire risks, Fire Plan Systems &
Projects Pvt .ltd is offering a range of versions with special spraying characteristics. All sprinkler
system components are also available as part of the fire plan services portfolio.
The different types of systems, such as wet or dry systems or pre-controlled dry systems, are adapted to
meet specific criteria, for instance places prone to frost or special risk areas.

Fire Water-spray extinguishing systems or hydrant system operate with open extinguisher nozzles which, in the event of ire, distribute the extinguishing water over the entire protected area, the quantity of extinguish ant needed being minimal. Spray extinguishing increases the surface area of the extinguishing water, entrains the heat of combustion and therefore cools the combustible substance. In addition to this cooling effect there is a smothering effect because the steam produced impedes the oxygen supply to the base of the fire. Water-spray extinguishing systems are designed for space or equipment protection. In the case of space protection the extinguishing water is distributed evenly across the whole area of the fire hazard. The extinguishing nozzles are therefore arranged evenly spaced at ceiling level. In the case of equipment protection systems, de -fined objects particularly subject to fire hazard are provided with water spray for protection or for preventive cooling. The extinguishing nozzles are therefore arranged to be specifically aimed at the object. For tall objects they may also be installed at several levels. Fire fighters can put away fire in an excellent way by installing fire hydrants. This industrial safety equipment or fire protection system is used with municipal or stored water service in urban as well as rural areas to combat fire break out. These water hydrant systems are useful in large buildings and areas where immediate water based fire fighting and rescue is necessary on a moderate scale. To increase water pressure the hose attached to the hydrant can be further attached to a fire engine to use a powerful pump. The valve is opened and provides as a source of water.

Fire detection systems
Fire detection systems are essential components of a responsible safety management concept. Each object and each area of use holds special risks and requirements. Fire Plan Systems & Projects Pvt .ltd provides the optimum detection of fires. An automatic fire alarm system is designed to detect the unwanted presence of fire by monitoring environmental changes associated with combustion. In general, a fire alarm system is classified as either automatically actuated, manually actuated, or both. Automatic fire alarm systems are intended to notify the building occupants to evacuate in the event of a fire or other emergency, report the event to an off-premises location in order to summon emergency services, and to prepare the structure and associated systems to control the spread of fire and smoke.

Fire detectors
Fire Plan Systems & Projects Pvt .ltd uses various models of standard fire detectors, optical smoke detectors, heat detectors, sparks and flame detectors according to the requirement. Special detectors include multi-function detectors, smoke detectors and alarm transmitters.
Fire detection control panels
Fire detection control panels span both standard control panels with line technology and ring bus panels for networked systems. With the diverse range of standard and special sensor technology, all configuration levels from compact small control panels to the comprehensive large panels can be compiled individually interplay with all other components of the safety concept. Fire Plan Systems & Projects Pvt .ltd fire detection systems detect fire dangers and incipient fires around the clock


Client          Client          Client          Client          Client          Client          Client          Client          Client